Your vacuum might be powerful, but even the best needs a little TLC. If you want your SuckR PRO to keep delivering epic suction and reliable results, regular maintenance is non-negotiable.
In this quick but essential guide, we’ll walk you through:
-
How to inspect and clean your HEPA filter
-
The right way to use (and install) a dust bag
-
What to do when switching between wet and dry vacuuming
Why Maintenance Actually Matters
It’s easy to overlook, but a blocked filter or badly installed bag can lead to:
-
Clogged airflow
-
Reduced suction performance
-
Overheating – and possibly blowing the motor
In fact, in our demo video, we show a SuckR PRO that was used for less than a month — and the filter was already caked in dust due to a misinstalled bag. Small mistake, big consequences. The good news? It’s super easy to avoid.
tep 1 – Check the Dust Bag Is Installed Correctly
Before anything else, open the two side latches and take a look inside. Your dust bag should be securely fitted to the inlet. If it’s loose or not installed correctly, debris will skip the bag entirely and collect in the tank — clogging up your filter fast.
Why use a dust bag?
-
It captures the majority of debris
-
Makes cleaning the tank much easier
-
Reduces how often your HEPA filter needs attention
Yes, the SuckR works bagless — but using the bag will keep things running cleaner for longer.
Step 2 – Inspect and Clean the HEPA Filter
Your HEPA filter is critical for maintaining airflow. When it gets dirty, suction drops and the motor starts working overtime.
To remove the filter:
-
Open the latches and lift the lid
-
Rotate the six retaining lugs
-
Lift out the filter
Cleaning tips:
-
Use compressed air or vacuum suction to blow out the dust
-
Avoid washing it with water unless it’s completely dry before reuse
-
Only replace it when it’s beyond saving
You can grab spare filters here:
👉 Shop HEPA Filters
Step 3 – Use Separate Filters for Wet and Dry Work
This is a must-do for detailers who use the SuckR for both wet and dry jobs.
Imagine you’ve just finished a dusty interior job and your filter is loaded with fine particles. If you then go straight into wet vacuuming, that dust turns to sludge — blocking the airflow completely.
Best practice:
-
One filter for dry jobs
-
One filter for wet use
-
Let used filters dry fully before using them again
Don’t let your filter become a concrete block.
Step 4 – Replace the Filter When Needed
Even the best filters wear out. If you notice:
-
Weak suction
-
Overheating
-
A dusty smell
It’s time for a new one. Filters are cheap insurance compared to a damaged motor.
Final Thoughts – Clean Filter, Clean Results
Maintenance might sound boring, but it saves you time and money. Cleaning your filter, using your bag properly, and swapping filters for wet jobs ensures your SuckR PRO runs at its best — and doesn’t burn out when you need it most.
Need Help?
For more tips and expert guides, check out the Detailing Garage blog or explore our Help Centre.
0 comments