BlowR PRO+ | How to sync your remote control

Step 1:
Plug into the Mains then turn the power switch to the ADJUSTABLE/REMOTE position(See below image)

Figure 1

Step 2:
Find the remote control pairing button just above the nameplate, and then quickly tap it twice with your finger (the operation should be completed within 2 seconds) as shown on the below image.

Figure 2

Step 3:
Then press the power start button, acceleration button and deceleration button on the remote control with your fingers (as shown in Figure 3). At this time, the receiver on the product has received the signal. To ensure that the pairing is successful, turn on the motor start switch (as shown in Figure 4) and check whether each button on the remote control functions normally. If the buttons on the remote control still do not work, repeat the above steps one by one

Figure 3 Figure 4

Note: 1) Each product has been successfully paired before leaving the factory. If you need to replace the remote control during use, follow the above steps to re-pair.
2) If you want to delete the current pairing, just press the pairing button on the front cover of the product for 10 seconds and the receiver will automatically delete it.