Welcome to the bigboi Knowledge Base
Your Source for Expert Advice, Troubleshooting, and Product Information
17
- BlowR Hose Reel
- BlowR PRO+ Manual
- BlowR Hose Reel Manual
- BlowR ChargD Manual
- SuckR MINI Manual
- D-IonizR 2 Manual
- D-IonizR 1 Manual
- BlowR PRO Manual
- ExtractR Mini Manual
- BlowR Mini+ Manual
- BlowR Mini Manual
- BlowR Buddi JNR Manual
- BlowR Buddi Manual
- WashR FLO Manual
- WashR DUO Manual
- WashR PRO Manual
- SuckR PRO Manual
20
- WashR DUO | What is the RED cap installed in the valve manifold?
- WashR DUO | The pressure fluctuates
- WashR DUO | The pump is running but does not reach the working pressure
- WashR DUO | The pressure drops during use
- WashR DUO | The pump is noisy
- WashR DUO | There is the presence of water in the oil
- WashR DUO | Is experiencing a water leak
- WashR DUO | The unit has an oil leak
- WashR DUO | The motor does not start when switched on
- WashR DUO | When I switch on the unit, the motor hums but does not run
- WashR DUO | For the TSS Version only. The motor starts even with gun trigger is released
- WashR DUO | For the TSS Version only. No water delivery when gun trigger is depressed
- WashR DUO | How to store the unit when not in use
- WashR DUO | How to maintain your unit (Maintenance Guide)
- WashR DUO | How to adjust your spray pressure
- WashR DUO | How to use your nozzles correctly
- WashR DUO | How to stop the unit
- WashR DUO | How to start the unit
- WashR DUO | How to setup the unit
- WashR DUO | How to check your oil level before use
30
- WashR PRO | What is the recommended size of the office for the foam cannon?
- WashR PRO | What is the Recommended size of the orifice nozzle?
- WashR PRO | What is the RED cap installed in the valve manifold?
- WashR PRO | Producing very low pressure?
- WashR PRO | The male connector connected to the inlet port is leaking?
- WashR PRO | Is making a beeping noise while running
- WashR PRO | Recommended wire gauge, AWG, if the unit will be connected to a power extension cord?
- WashR PRO | The current surged high while the WashR is starting up
- WashR PRO | Motor is still running even after releasing the trigger of the trigger gun
- WashR PRO | Producing humming sound after turning on, and tripping the circuit breaker
- WashR PRO | PCB Delete Kit Installation Instructions
- WashR PRO | For the TSS Version only. No water delivery when gun trigger is depressed
- WashR PRO | For the TSS Version only. The motor starts even with gun trigger is released
- WashR PRO | When I switch on the unit, the motor hums but does not run
- WashR PRO | The motor does not start when switched on
- WashR PRO | The unit has an oil leak
- WashR PRO | Is experiencing a water leak
- WashR PRO | There is the presence of water in the oil
- WashR PRO | The pump is noisy
- WashR PRO | The pressure drops during use
- WashR PRO | The pressure fluctuates
- WashR PRO | The pump is running but does not reach the working pressure
- WashR PRO | How to store the unit when not in use
- WashR PRO | How to maintain your unit (Maintenance Guide)
- WashR PRO | How to Adjust your Spray Pressure
- WashR PRO | How to use your Nozzles correctly
- WashR PRO | How to Stop the unit
- WashR PRO | How to Start the unit
- WashR PRO | How to setup the unit
- WashR PRO | How to check your oil level before use
17
- WashR FLO | Is the hose and gun covered by warranty
- WashR FLO | My unit turns off due to overheating
- WashR FLO | My unit is not turning off
- WashR FLO | Why is my hose vibrating
- WashR FLO | My unit is no longer turning on
- WashR FLO | Water is leaking from the pump
- WashR FLO | The pump is very noisy
- WashR FLO | Spray wand is leaking
- WashR FLO | No detergent present
- WashR FLO | Output pressure varies high and low
- WashR FLO | Does not reach high enough pressure
- WashR FLO | Motor starts up but there is no working pressure
- WashR FLO | The motor stops
- WashR FLO | Motor refuses to start
- WashR FLO | Maintenance Guide
- WashR FLO | How to turn your unit on and off
- WashR FLO | How to set up your unit
14
- SuckR PRO - How to sync your SuckR PRO with the XtractR KIT Remote
- SuckR PRO | How can I avoid filter issues?
- SuckR PRO | Why is the unit not turning on
- SuckR PRO | How to setup the unit?
- SuckR PRO | How do you change your filter bag?
- SuckR PRO | How to avoid HEPA filter Issues
- SuckR PRO | My unit is not turning on
- SuckR PRO | Why Is the Suction Weakening? (Losing Power)
- SuckR PRO | Why Is My Engine Housing Overheating?
- SuckR PRO | Storage and Transportation
- SuckR PRO | How to maintain the unit (Maintenance Guide)
- SuckR PRO | How to Use the Extraction Function (Kit Sold Separately)
- SuckR PRO | How to Use the Vacuum Function (Wet & Dry)
- SuckR PRO | How to Assemble the unit
4
WashR PRO
WashR PRO Technical Support
Welcome to the WashR PRO Technical Support section. Here, you’ll find detailed guides and troubleshooting tips specifically for the Bigboi WashR PRO. Whether you need help with setup, maintenance, or resolving technical issues, this section provides all the information you need. If you still need assistance, don't hesitate to reach out to Bigboi tech support for further help.
- WashR PRO | What is the recommended size of the office for the foam cannon?
- WashR PRO | What is the Recommended size of the orifice nozzle?
- WashR PRO | What is the RED cap installed in the valve manifold?
- WashR PRO | Producing very low pressure?
- WashR PRO | The male connector connected to the inlet port is leaking?
- WashR PRO | Is making a beeping noise while running
- WashR PRO | Recommended wire gauge, AWG, if the unit will be connected to a power extension cord?
- WashR PRO | The current surged high while the WashR is starting up
- WashR PRO | Motor is still running even after releasing the trigger of the trigger gun
- WashR PRO | Producing humming sound after turning on, and tripping the circuit breaker
- WashR PRO | PCB Delete Kit Installation Instructions
- WashR PRO | For the TSS Version only. No water delivery when gun trigger is depressed
- WashR PRO | For the TSS Version only. The motor starts even with gun trigger is released
- WashR PRO | When I switch on the unit, the motor hums but does not run
- WashR PRO | The motor does not start when switched on
- WashR PRO | The unit has an oil leak
- WashR PRO | Is experiencing a water leak
- WashR PRO | There is the presence of water in the oil
- WashR PRO | The pump is noisy
- WashR PRO | The pressure drops during use
- WashR PRO | The pressure fluctuates
- WashR PRO | The pump is running but does not reach the working pressure
- WashR PRO | How to store the unit when not in use
- WashR PRO | How to maintain your unit (Maintenance Guide)
- WashR PRO | How to Adjust your Spray Pressure
- WashR PRO | How to use your Nozzles correctly
- WashR PRO | How to Stop the unit
- WashR PRO | How to Start the unit
- WashR PRO | How to setup the unit
- WashR PRO | How to check your oil level before use