If your BlowR PRO+ remote control isn’t working, or you’ve replaced it with a new one, here’s how to re-sync it to the unit in just a few steps.

Step-by-Step Pairing Instructions:

1. Power On in Remote Mode

• Plug the unit into the mains.

• Switch the power dial to the ADJUSTABLE/REMOTE position.

Figure 1

2. Locate and Tap the Pairing Button

• Find the small pairing button just above the nameplate on the front of the unit.

• Quickly tap it twice within 2 seconds.

Figure 2

3. Press Buttons on the Remote

• On your remote, press the following buttons in sequence:

  • Power Start

  • Acceleration

  • Deceleration

• This sends the pairing signal to the unit’s receiver.

Figure 3 Figure 4

4. Confirm Sync is Successful

• Turn the power switch on the unit to activate the blower.

• Test each button on the remote to make sure it’s functioning correctly.

If the remote still doesn’t work, repeat steps 1 to 4 carefully.

Additional Notes:

• Factory Paired: All BlowR PRO+ units are paired with their remotes before leaving the factory.

• Replacing a Remote? Use the above process to re-pair a new remote to your existing unit.

• Need to Delete a Pairing? Hold the pairing button on the front of the unit for 10 seconds to reset the receiver and clear existing remote connections.

Still need help?

If you're having trouble syncing your remote or need a replacement, contact bigboi customer support — our team is here to help.