Starting and stopping your bigboi WashR FLO correctly is essential for safe and effective operation. Follow the guide below to ensure everything runs smoothly.

✅ Preparation Before Use

• Make sure the pressure washer is fully assembled.

• Connect the unit to a suitable water supply and ensure the inlet screen is clean.

• Plug into a power supply. Make sure the main power switch is in the OFF position.

• Check that your spray gun, lance, and hose are properly connected and secure.

▶️ Starting the WashR FLO

1. Turn the main power switch ON.

2. Adjust your spray lance to the desired pattern or pressure.

3. Point the nozzle at the area to be cleaned.

4. Press the trigger on the spray gun to begin washing.

Tip: Always test the trigger with the nozzle pointed away from the car to ensure safe operation.

⏹️ Stopping the WashR FLO

1. Turn the switch to OFF.

2. Shut off the water supply.

3. Squeeze the trigger on the spray gun to discharge any remaining water from the system.

4. Once the water flow stops, lock the trigger in the OFF position.

5. Unplug the unit from the power outlet.

Need More Help?

If you're having trouble starting or stopping your WashR FLO, check out our troubleshooting guide or contact our support team for further assistance.