Properly storing your WashR PRO keeps it in top shape, ready to go the next time you need it — whether that’s tomorrow, in a few months, or after winter.

🧼 After Regular Use (Every Time You Pack It Away)

✅ Drain and Store the High-Pressure Hose

• Disconnect and drain all water from the high-pressure hose.

• Coil the hose neatly and hang it on the cradle attached to the pressure washer frame.

• If you used any chemicals during your wash, be sure to flush out the pump and chemical hose with clean water.

✅ Drain and Store the Gun & Lance

• Hold the gun vertically with the nozzle pointing downward.

• Squeeze the trigger to release any leftover water.

• Store the gun and lance in their holders on the unit.

❄️ Winter or Long-Term Storage (30+ Days or Cold Temps)

If you’re storing your WashR PRO for more than 30 days or in freezing conditions, follow these steps to protect the internal seals from damage.

🧃 What You’ll Need:

• A Pressure Washer Pump Freeze Guard (antifreeze bottle)

• A short length of garden hose (~1 metre) with a male connector on one end

🛠️ Step-by-Step:

1. Connect the hose to the water inlet on the pump.

2. Attach the Freeze Guard bottle to the hose.

3. Squeeze the bottle until antifreeze starts to flow out of the pump outlet.

4. Disconnect and remove the short hose from the water inlet.

Following these steps will keep your WashR PRO protected during downtime, cold weather, or storage between seasons.

Still need help? Reach out to our support team — we’ll make sure your gear stays in perfect working order year-round.