SuckR PRO – How to Sync with the XtractR KIT Remote

Compatible with XtractR KIT (sold separately)

To enable the spray functionality of your SuckR PRO with the XtractR KIT, you’ll need to sync (or pair) the remote with the unit. This quick guide will walk you through the process to ensure everything is paired correctly and working as expected.

Step-by-Step Instructions

1. Check the Remote Battery

Before pairing, make sure the remote has a working battery:

• Hold down the power button on the remote.

• A green light will flash through the small display window if the battery is operational.

If no light appears, replace the battery before proceeding.

2. Turn On the SuckR PRO

• Set the main power switch to the “I” position (On).

3. Initiate the Pairing Process

• Hold down the power button or “S” button on the remote.

• While holding, double-tap the setting button on the unit itself.

• This will send a signal to pair the SuckR PRO with the XtractR KIT remote.

Troubleshooting Tips

• If pairing doesn’t work the first time, try the steps again—you may have missed a step or the timing was off.

• Ensure the remote battery is charged and inserted correctly.

• Make sure the unit is powered on before attempting the sync.

Still Having Trouble?

If you’ve followed the steps and your remote still won’t pair:

• Contact our support team for assistance.

• This issue may be covered under warranty depending on the circumstances.

You can reach support here: bigboi Support Team »