Welcome to the bigboi Help Centre

Your Source for Expert Advice, Troubleshooting, and Product Information

WashR FLO | Does not reach high enough pressure

If your WashR FLO isn’t reaching the high pressure it’s known for, there are a few simple things to check before assuming it’s a serious fault. Low pressure is usually caused by a blockage, incorrect setup, or issues with water flow. Follow the guide below to diagnose and fix the problem quickly.

Possible Cause What You Can Do
Diameter of garden hose is too small Use a 1/2 inch or 5/8 inch garden hose to ensure proper water flow. Avoid using narrower hoses that restrict pressure.
Water supply is restricted Check your garden hose for kinks, leaks, or blockages. Also ensure your water source is turned on fully.
Water inlet filter is clogged Remove the inlet filter and rinse thoroughly with warm water to clear any debris or buildup.
Spray wand is set to low pressure Twist the adjustable nozzle or wand head to switch to the high-pressure setting for full cleaning power.
Debris in valves or nozzle, or water leaks Use the provided nozzle cleaning tool to clear any blockages. Inspect valves and all hose connections for leaks or damage and replace if needed.

Still Need Help? 

If you’ve checked everything above and your pressure is still low, contact our support team — we’ll help diagnose the issue or organise a service if required.

Updated on 18 Jun 2025

WashR FLO | Why is my hose vibrating
WashR FLO | How to set up your unit